How to Setup FVDI J2534 to Work with Nissan Consult

How to Setup FVDI J2534 to Work with Nissan Consult
FVDI J2534 is a vehicle communication interface device full compatible with SAE J2534-1 and partly compatible with SAE J2534-2. It supports most of vehicle communication protocols and can be used as PassThru device for many dealer level diagnostic software

You need modify “DiagnosticTool.ini”

Try with this:
[current_geographical_zones]
market=2
area=3
country=Z31
[current_language]
language=GB
[unit_conversion]
unit_conv_1=G001.S001
unit_conv_2=G002.S003
unit_conv_3=G003.S005
unit_conv_4=G004.S007

[current_channel]
channel=0

[system_management]
access_mode=1

[device]
vi_device_name=REPLACE THIS WITH YOUR J2534 DEVICE NAME

[mode]
debug_mode=TRUE
debug_mode_vehicle_battery=TRUE

Note: if it gives you “Connections failure to VI
Touch show detail and confirm the detail”

That is,
the “vi_device_name” is not correct, I was have the same problem with vas5054 and actia xs as passthru.
You need check your correct device name, It’s very important because consult need’s “call” your device driver.
Try on device properties to search the device name.